Print this page out before you start so that you will have written instructions to follow.

Windows95, Windows98:

1. Double click on My Computer
2. Double click on Dialup Networking folder
3. Right click on the connection icon
4. Click on the Server Types tab and UNcheck "Log onto Network"
5. Click on the Scripting tab and delete the script file
6. Click on OK and then close the window

WindowsME:

1. Click on Start -- Settings -- Dialup Networking
2. Right click on the connection icon
3. Click on the Server Types tab and UNcheck "Log onto Network"
4. Click on the Scripting tab and delete the script file
5. Click on OK and then close the window

WindowsXP:

1. Click on Start -- Connect To
2. Click on Properties
3. Click on the Security tab
4. Delete the Run Script checkmark and script file

Macintosh using the ConfigPPP control panel.

1. Open Apple Menu - Control panels - ConfigPPP
2. Click on Config
3. Click on Authentication
4. Make sure that their username and password (dots) are in the Authentication window; click ok (or done)
5. Click on Connection Script
6. Set left column all to "out"; set right column all to "unchecked"; set all middle column text boxes to blank
7. Ok (or done); then ok (or done) again.
8. Close ConfigPPP control panel

Macs with PPP control panel and Macs with Remote Access control panel

1. Open PPP or Remote Access control panel
2. Click on Options button
3. Click on Protocol tab at top
4. Uncheck the "connect to a command line host" setting
5. close out, save settings

ValleyNet

58 North Main Street, PO Box 486, White River Junction, VT 05001 Voice 802 359-4162  |  Fax 802 359-4164